ACTOSAL® PA Powder
High-Level Floor, Surface and Environment Disinfectant- Floor and surface disinfectant with broad spectrum of action
- Has bactericidal, fungicidal, tuberculocidal and virucidal action
- Based on active oxygen system
- Fast-acting and cleaning and disinfection in one operation
- Can be used in the form of wiping for floor and surfaces or of spraying by preparing in spray packaging
- The solution prepared at the appropriate concentration for environment disinfection can be applied by putting it in the device
Properties
Actosal® PA Powder, is based on the active oxygen system. Has a broad spectrum of action. No special liquid is needed to prepare the solution. The product prepared with water provides an easy and practical application. Its composition does not contain alcohol, quaternary ammonium compounds, biguanide, aldehyde and phenol.
The solution is used alone in air/environment, floor and surface cleaning and disinfection applications. At usage doses, it does not have an adverse effect on personnel using it and the materials used. Solution has a pink color. Discoloration of the solution indicates that the activity of solution has decreased. The activity indicator is evaluated by color change. When used according to the recommendations for use, it does not adversely affect the user personnel and the materials used.
Used for floor and surface disinfection in areas such as operating room, intensive care, laboratory, dialysis center and so on., for aerial disinfection of critical areas (terminal disinfection/fogging) and in incubators.
Chemical composition
100 g contains: 50% Potassium monopersulfate, 19.95% cleaner, 2% corrosion inhibitor and auxiliary substances.
Microbiological Activity
| Microbiological Activity | Test Method | Concentration | Effect Time |
|---|---|---|---|
| Bakterisidal | EN 13727 / EN 1656 / EN 1276 | 0.25 % | 5 min |
| Fungisidal (C.albicans, A.niger) | EN 13624 / EN 1657 / EN 1650 | 0.25 % | 5 min |
| Tuberculocidal Mycobactericidal | EN 14348 | 0.25 % | 5 min |
| Virusidal (Adeno, Polio, MNV) | EN 14476 | 0,25 % | 5 min |
Method of Use:
First fill the container that you will prepare the solution with water, then add Actosal® PA Powder in an the appropriate ratio. Allow the powder to dissolve for 5 to 10 minutes. The powder should be stirred until it is completely dissolved and a clear, transparent, pink solution appears.
It is applied after every contamination by mopping for disinfection and cleaning processes of floors and by wiping for other surfaces. Prepare a sufficient dosage and put it into the device for environment disinfection. Solution prepared within the spraying bottle is used by spraying for disinfection of surfaces.
1 liter of water – 5 g of Actosal® PA Powder
5 liter of water – 25 g of Actosal® PA Powder
10 liter of water – 50 g of Actosal® PA Powder
Concentration of Use
| Concentration Ratio | Amount of Water | Product Quantity |
|---|---|---|
| %0,5 | 1000 ml | 5 ml |
Packaging
| Unit | Pieces in Box | Article-No. |
|---|---|---|
| 50 g | 108 | 05.5502.1 |
| 1 kg | 10 | 05.5502.1 |
| 5 kg | 1 | 05.5502.5 |